Skip to content

Se habla español

TAG Auto Equipment
Back to MIG Welding
Pro Spot PR-220MV Multi-Process Inverter Welder

Pro Spot

PR-220MV Multi-Process Inverter Welder

MIG Welding

The PR-220MV is a microprocessor-controlled, multi-process inverter welder with front panel function selection and a digital LCD display for welding voltage, current and selected parameters. It has a multi-voltage adapter that switches from 220V to 100V with a plug-in, synergic or manual weld modes, savable weld programs and an optional cart. It suits auto body shops, sheet metal fabrication and light maintenance and repair.

Key specifications

Input
1 phase; 230V or 115VAC; 50/60Hz
MIG duty cycle
200A DC at 35%; 120A DC at 100%
Output range
MIG 20-200A; TIG 5-200A; MMA 5-200A
Current range
5-200A
Insulation
Type H
Protection
IP22S
Specifications
Quantity
1
Request a Quote

Nothing is purchased online. TAG confirms configuration with you.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Dimensions
20 x 11 x 17 in (508 x 280 x 432 mm)

What TAG confirms with you

  • Incoming power at the weld station: voltage, phase and breaker size
  • Materials you repair — steel, high-strength steel, aluminium or a mix
  • Processes you need to cover, such as squeeze-type resistance, MIG or brazing
  • Whether aluminium work must be isolated from steel work
  • Fume extraction and ground/clamp access around the vehicle

Welding Output & Power

Input
1 phase; 230V or 115VAC; 50/60Hz
MIG duty cycle
200A DC at 35%; 120A DC at 100%
Output range
MIG 20-200A; TIG 5-200A; MMA 5-200A
Current range
5-200A
Insulation
Type H
Protection
IP22S
Dimensions
20 x 11 x 17 in (508 x 280 x 432 mm)

What ships with it

The sheet separates supplied items from parts shipped inside the welder; both are supplied with the machine.

Supplied components
17
Listed as optional
0
Included components (17 items)
  • Ergonomic Steel MIG Torch (Green), 9 ft. cable lengthPart no. 82-70161 ea.
  • ER70S-6 Steel Welding Wire 0.8mm (0.030"), 1kgPart no. 83-00141 ea.
  • Gas RegulatorPart no. 82-70011 ea.
  • Inside the welder — Welder HandlePart no. 90-06101 ea.
  • Inside the welder — Ground CablePart no. 82-70181 ea.
  • Inside the welder — Gas HosePart no. 82-70371 ea.
  • Inside the welder — Contact Tip 0.6mm / 0.023"Part no. 50-70061 ea.
  • Inside the welder — Contact Tip 0.8mm / 0.030"Part no. 50-70081 ea.
  • Inside the welder — Contact Tip 0.9mm / 0.035"Part no. 50-70091 ea.
  • Inside the welder — Contact Tip 1.0mm / 0.040"Part no. 50-70101 ea.
  • Inside the welder — Wire Roller 0.6mm/0.9mm (0.023"/0.035")Part no. 50-70201 ea.
  • Inside the welder — Wire Roller 1.0mm/1.2mm (0.040"/0.045")Part no. 50-70211 ea.
  • Inside the welder — Wire Roller 0.8mm/1.0mm (0.030"/0.040"), installed on welderPart no. 50-72091 ea.
  • Inside the welder — Accessory ContainerPart no. 83-20601 ea.
  • Inside the welder — Welder Handle Hardware
  • Inside the welder — Gas Hose Clamps
  • Inside the welder — Gas Regulator Fitting

View full component sheet

Shipping data

Crate figures for transport planning. These are not operating specifications.

Shipping dimensions
28" x 11.5" x 15.5"
Shipping weight
53 lbs (24 kg)

Source: Pro Spot PR-220MV Component List Rev. B V.1.0.

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelPro Spot
PR-220MV Multi-Process Inverter WelderYou are viewing		Pro Spot
PR-205MV Synergic MIG Welder
Why TAG lists itThis modelPro Spot publishes the PR-205MV as another synergic MIG platform. Compare before choosing.
Input1 phase; 230V or 115VAC; 50/60Hz1 phase; 230V or 115V; 50/60Hz
Current range5-200A5-170A
InsulationType HType H
ProtectionIP22SIP22S
Dimensions20 x 11 x 17 in (508 x 280 x 432 mm)21 x 10 x 13 in (534 x 254 x 331 mm)

Configure this PR-220MV Multi-Process Inverter Welder

Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for PR-220MV Multi-Process Inverter Welder

TAG confirms final fit and configuration before purchase.

10 of 10 shown

Optional accessory · 10

  • Optional accessory

    Pro Spot CART-100 Welding Cart

    Part no. CART-100

    Pro Spot welding cart designed for the Pro Spot PR-220MV, PR-205MV and SP-1 welders.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Gas Nozzle (Green or Orange Torch)

    Part no. 50-7011

    Pro Spot 50-7011 — Nozzle for Plus 15 Torch. Repeat-order consumable stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Gas Diffuser for Steel & Silicon Bronze (Green & Orange) Torch

    Part no. 50-7151

    Pro Spot 50-7151 — Gas Diffuser for Plus 15 Torch. Repeat-order consumable stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Mild Steel Welding Wire 0.8mm (5kg)

    Part no. 50-7208

    Pro Spot 50-7208 — Mild Steel Welding Wire, 0.8 mm / .030 in. Supplied as a 5 kg. Repeat-order consumable stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Contact Tip, 0.9 mm / .035 in

    Part no. 50-7009

    Pro Spot 50-7009 — Contact Tip, 0.9 mm / .035 in. Repeat-order consumable stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Contact Tip, 0.8 mm / .030 in

    Part no. 50-7008

    Pro Spot 50-7008 — Contact Tip, 0.8 mm / .030 in. Repeat-order consumable stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details
Quote Cart (—)

Compatible consumables

TAG confirms final fit and configuration before purchase.

  • Pro Spot Gas Nozzle (Green or Orange Torch), part number 50-7011

    50-7011

    Gas Nozzle (Green or Orange Torch)

    MIG/MAG Welding · Torch Consumables

    Choose Options
  • Pro Spot Gas Diffuser for Steel & Silicon Bronze (Green & Orange) Torch, part number 50-7151

    50-7151

    Gas Diffuser for Steel & Silicon Bronze (Green & Orange) Torch

    MIG/MAG Welding · Torch Consumables

    Choose Options
  • Pro Spot Mild Steel Welding Wire 0.8mm (5kg), part number 50-7208

    50-7208

    Mild Steel Welding Wire 0.8mm (5kg)

    MIG/MAG Welding · Welding Wire · 5 kg

    Choose Options
  • Pro Spot Contact Tip, 0.9 mm / .035 in, part number 50-7009

    50-7009

    Contact Tip, 0.9 mm / .035 in

    MIG/MAG Welding · Contact Tips

    Choose Options
  • Pro Spot Contact Tip, 0.8 mm / .030 in, part number 50-7008

    50-7008

    Contact Tip, 0.8 mm / .030 in

    MIG/MAG Welding · Contact Tips

    Choose Options
  • Pro Spot Gas Diffuser Spring, part number 50-7152

    50-7152

    Gas Diffuser Spring

    MIG/MAG Welding · Torch Consumables

    Choose Options

View all 9 consumables for this machine

Build out this work area

Ways to Expand the Workflow

Equipment to review when expanding this workflow.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop