Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to scissor-lifts
Challenger Lifts SX14 14K Heavy-Duty Scissor Alignment Lift

Challenger Lifts

SX14 14K Heavy-Duty Scissor Alignment Lift

scissor-lifts

Challenger's SX14 Series is a 14,000 lb. capacity heavy-duty scissor alignment lift supplied with two rolling jacks, adjustable turn plates and an airline kit for dual jack operation. Extra-wide runways accommodate single and dual rear wheel vehicles, a photo cell keeps the runways synchronized, and an automatic light feature illuminates the underside of the vehicle. Surface- and flush-mounted models are available, plus an extended ramp version for low-clearance vehicles.

Model

Choose a model to add this product to your project.

Capacity
14,000 lbs.
Mounting
Surface mount
Rise height
77"
Overall length
265"

Key specifications

Lifting capacity
14,000 lbs.
Rise height
77" (66.5" flush mount)
Speed of rise
75 s
Lowered height
10.5" (surface models)
Models
SX14 (standard) / SX14-ER (extended ramps) / SX14-FM (flush mount)
Overall length
265" (283" with extended ramps); overall width 91.25"
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a model above before adding this product to your project.

Not in your project yet

Configure This ModelRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
14,000 lbs.
Overall length
265" (283" with extended ramps); overall width 91.25"
Air required
90-120 psi (20 CFM), filtered/lubricated
Min. recommended bay size
14' x 28'

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

Two rolling jacks

Every published SX14 configuration is listed with two rolling jacks.

25.5" runways, 183" wheelbase

Runway width is 25.5" and the maximum wheelbase is 183".

ALI/ETL certified

Challenger lists these models as ALI/ETL certified.

Capacity & Dimensions

SX14: 14,000 lbs. lifting capacity; surface mount; 77" rise height; 265" overall length.

ConfigurationCapacityMountingRise heightOverall length
SX1414,000 lbs.Surface mount77"265"
SX14-ER14,000 lbs.Surface mount, extended ramps77"283"
SX14-FM14,000 lbs.Flush mount66.5"265" published base
Models
SX14 (standard) / SX14-ER (extended ramps) / SX14-FM (flush mount)
Lifting capacity
14,000 lbs.
Rise height
77" (66.5" flush mount)
Overall length
265" (283" with extended ramps); overall width 91.25"
Runways
25.5" wide; 40" between runways
Lowered height
10.5" (surface models)
Maximum wheelbase
183"
Wheel alignment
70.75" min. – 176" max.
Motor
3HP; 208-240v single phase standard (23 FLA)
Speed of rise
75 s
Air required
90-120 psi (20 CFM), filtered/lubricated
Min. recommended bay size
14' x 28'

Additional details

  • Challenger lists these models as ALI/ETL certified

Configure this SX14 14K Heavy-Duty Scissor Alignment Lift

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Build out this work area

Related Equipment to Review

Related equipment to review for this work area.

Final configuration is confirmed before purchase.

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelChallenger Lifts
SX14 14K Heavy-Duty Scissor Alignment LiftYou are viewing		Challenger Lifts
4115 15K Four-Post Lift / Alignment
Why TAG lists itThis modelChallenger publishes the 4115 four-post lift as another alignment-capable platform. Compare before choosing.
ModelsSX14 (standard) / SX14-ER (extended ramps) / SX14-FM (flush mount)4115EFO / 4115XFO / 4115EFX / 4115XFX / AR4115EAO / AR4115XAO / AR4115EAX / AR4115XAX
Lifting capacity14,000 lbs.15,000 lbs.
Rise height77" (66.5" flush mount)78"
Overall length265" (283" with extended ramps); overall width 91.25"247.625" – 277"; overall width 142"
Runways25.5" wide; 40" between runways26" wide, 7" high; 40.625" between runways
Motor3HP; 208-240v single phase standard (23 FLA)2HP, 208v-230v, 60Hz, 1Ph

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop