Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to four-post-lifts
Challenger Lifts 4P14 14K Four-Post General Service Lift / Optional Alignment

Challenger Lifts

4P14 14K Four-Post General Service Lift / Optional Alignment

four-post-lifts

Challenger's 4P14 Series is a 14,000 lb. closed-front, drive-on four-post lift with a low approach angle and 20" wide runways for straightforward drive-on. Its 78" rise height is among the highest Challenger offers, and 14 locking positions let technicians set an ergonomic working height. Louvered approach ramps provide traction, and the lift is available in two lengths with optional alignment accessories.

Model

Choose a model to add this product to your project.

Capacity
14,000 lbs.
Max. wheelbase
182.5"
Rise height
78"
Overall length
245.75"

Key specifications

Lifting capacity
14,000 lbs.
Rise height
78"
Speed of rise
90 s
Height of columns
90.5"
Overall width
130.75"
Inside columns
116"; between columns 196" / 223.5"
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a model above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
14,000 lbs.
Overall length
245.75" / 273.25"
Overall width
130.75"
Height of columns
90.5"
Air supply required
90-120 psi
Min. recommended bay size
12' x 24' (EFX) / 12' x 26' (XFX)

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

14,000 lb capacity

Both published 4P14 models carry a 14,000 lbs. lifting capacity.

Two wheelbase lengths

Max. wheelbase 182.5" on the EFX and 210" on the XFX.

ALI/ETL certified

Challenger lists this model as ALI/ETL certified.

Capacity & Dimensions

4P14EFX: 14,000 lbs. capacity; closed front; 182.5" max. wheelbase; 78" rise height; 245.75" overall length; min. recommended bay size 12' x 24'.

ConfigurationCapacityMax. wheelbaseRise heightOverall length
4P14EFX14,000 lbs.182.5"78"245.75"
4P14XFX14,000 lbs.210"78"273.25"
Models
4P14EFX / 4P14XFX
Lifting capacity
14,000 lbs.
Front
Closed
Max. wheelbase
182.5" (EFX) / 210" (XFX)
Rise height
78"
Overall length
245.75" / 273.25"
Overall width
130.75"
Inside columns
116"; between columns 196" / 223.5"
Height of columns
90.5"
Runways
20" wide, 7.25" high; 40" / 43" between runways
Air supply required
90-120 psi
Motor
2HP, 208v-230v, 60Hz, 1Ph
Speed of rise
90 s
Min. recommended bay size
12' x 24' (EFX) / 12' x 26' (XFX)

Additional details

  • Challenger lists this model as ALI/ETL certified

Configure this 4P14 14K Four-Post General Service Lift / Optional Alignment

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for 4P14 14K Four-Post General Service Lift / Optional Alignment

TAG confirms final fit and configuration before purchase.

Optional accessory · 4

  • Optional accessory

    Challenger Lifts 14K/15K Standard Airline Kit (40230-E)

    Part no. 40230-E

    Challenger airline kit that mounts and secures the airline to the bottom of a four-post lift runway, supplying air for Challenger's optional rolling jacks. One airline kit provides air for two jacks. Fits 4P14 and 4115 Standard Series four-post lifts.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts 7.5K Rolling Jack (RJ7.5)

    Part no. RJ7.5

    Challenger rolling jacks work with Challenger four-post lifts and remove the need for manual bottle jacks. They roll along the accessory rail and include extendable widths and adapters so technicians can reach vehicle pick-up points.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Light Bar Kit (EAK0361V64A-US)

    Part no. EAK0361V64A-US

    LED light bars that come in pairs, feature motion detection, are 27" long and include 10400 mAh rechargeable batteries. The strong magnets place light in many different areas of a shop, output is adjustable from 100 to 1000 lumens, and the ends rotate 360 degrees.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts 32 Gallon Adjustable Oil Drain Pan (10267)

    Adjustable-width oil drain pan kit with 32 gallon capacity. Fits 4P14, 4015, 4018, 4115 and 44018 series lifts.

    Fits this model.

    Full Details
My TAG Project (0)

Build out this work area

Upgrade Options to Review

Another option to compare in the same line.

Ways to Expand the Workflow

Equipment to review when expanding this workflow.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop