Pro Spot
VAC-U-PULL Dent Pulling Tower (Product Family: VAC-U-PULL-L, VAC-U-PULL-XL, VAC-U-PULL-XL-LB)
Dent Pulling Systems & Towers
VAC-U-PULL is a mobile dent pulling tower with a vacuum system that seals to the floor, so the tower is secured without hooks, straps or anchors. It comes in VAC-U-PULL-L, VAC-U-PULL-XL and VAC-U-PULL-XL-LB configurations, with an optional Lever Bar Kit and anchor plate for the XL and an extension kit for the L. This listing covers the family rather than one model.
Model
Choose a model to add this product to your project.
- Pulling force
- 500 lb (220 kg)
- Air pressure
- 60 PSI
- Operating height
- 3.5-54 in
- Weight
- 56 lb (25.4 kg)
Key specifications
- VAC-U-PULL-XL weight
- 61 lb (27.7 kg)
- VAC-U-PULL-L weight
- 56 lb (25.4 kg)
- VAC-U-PULL-XL dimensions
- 73 H x 19 W x 32 D in (185.4 x 48.2 x 81.2 cm)
- VAC-U-PULL-L dimensions
- 56.5 H x 16 W x 28 D in (143.5 x 40.6 x 71 cm)
- VAC-U-PULL-XL maximum pulling force
- 550 lb (249 kg)
- VAC-U-PULL-XL air pressure
- 75 PSI
Choose a model above before adding this product to your project.
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
- VAC-U-PULL-XL air pressure
- 75 PSI
- VAC-U-PULL-XL dimensions
- 73 H x 19 W x 32 D in (185.4 x 48.2 x 81.2 cm)
- VAC-U-PULL-XL weight
- 61 lb (27.7 kg)
- VAC-U-PULL-L air pressure
- 60 PSI
- VAC-U-PULL-L dimensions
- 56.5 H x 16 W x 28 D in (143.5 x 40.6 x 71 cm)
- VAC-U-PULL-L weight
- 56 lb (25.4 kg)
What TAG confirms with you
- Bay dimensions, ceiling height and working clearances
- Floor slab thickness, condition and anchoring
- Electrical service, air supply and any drainage needed
- Vehicle mix, throughput and how the bay is used day to day
- Delivery access, rigging and installation scope
Two pulling forces
VAC-U-PULL-L is rated at 500 lb (220 kg); VAC-U-PULL-XL is rated at 550 lb (249 kg).
Shop air powered
air pressure is 60 PSI on the L and 75 PSI on the XL.
Operating height
3.5-54 in on the L and 3.5-65 in on the XL.
System Specifications
VAC-U-PULL-L: 500 lb (220 kg) maximum pulling force; 60 PSI air pressure; 3.5-54 in (8.9-137 cm) operating height; 56.5 H x 16 W x 28 D in; 56 lb (25.4 kg).
| Configuration | Pulling force | Air pressure | Operating height | Weight |
|---|---|---|---|---|
| VAC-U-PULL-L | 500 lb (220 kg) | 60 PSI | 3.5-54 in | 56 lb (25.4 kg) |
| VAC-U-PULL-XL | 550 lb (249 kg) | 75 PSI | 3.5-65 in | 61 lb (27.7 kg) |
- 550 lb (249 kg)
- 75 PSI
- 3.5-65 in (89 mm-165 cm)
- 73 H x 19 W x 32 D in (185.4 x 48.2 x 81.2 cm)
- 61 lb (27.7 kg)
- 500 lb (220 kg)
- 60 PSI
- 3.5-54 in (8.9-137 cm)
- 56.5 H x 16 W x 28 D in (143.5 x 40.6 x 71 cm)
- 56 lb (25.4 kg)
Configure this VAC-U-PULL Dent Pulling Tower (Product Family: VAC-U-PULL-L, VAC-U-PULL-XL, VAC-U-PULL-XL-LB)
Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
Accessories for VAC-U-PULL Dent Pulling Tower (Product Family: VAC-U-PULL-L, VAC-U-PULL-XL, VAC-U-PULL-XL-LB)
Optional accessory · 9
Optional accessory
Pro Spot VAC-LB-RK Lever Bar Kit
Part no. VAC-LB-RK
Optional accessory
Pro Spot VAC-EXT Vac-U-Pull Extension Kit
Part no. VAC-EXT
Optional accessory
Pro Spot Floor gasket seal for VAC-U-PULL (56" tall)
Part no. 84-0501
Optional accessory
Pro Spot Muffler for SA-0148: Vacuum Ejector Venturi
Part no. 51-0183
Optional accessory
Pro Spot Air Regulator for VAC-U-PULL-XL
Part no. SA-0813
Optional accessory
Pro Spot 6 Hook Claw
Part no. SA-0812
Optional accessory
Pro Spot Vacuum Ejector Venturi Muffler
Part no. SA-0148
Optional accessory
Pro Spot Floor gasket seal for VAC-U-PULL XL (73" tall)
Part no. 90-2526
Optional accessory
Pro Spot : Hand Winch w/Belt Black 19mm Hook for VAC-U-PULL-XL
Part no. 82-0300
Compatible consumables
Floor gasket seal for VAC-U-PULL (56" tall)
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
Muffler for SA-0148: Vacuum Ejector Venturi
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
Air Regulator for VAC-U-PULL-XL
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
6 Hook Claw
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
Vacuum Ejector Venturi Muffler
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
Floor gasket seal for VAC-U-PULL XL (73" tall)
Steel & Single-Sided Dent Repair · VAC-U-PULL-XL Components
Build out this work area
Related Equipment to Review
Related equipment to review for this work area.
- View details for Pro Spot MWS-GTK-AL-ST Aluminum, Steel and Glue Dent Repair Station
Pro Spot
Dent Pulling Systems & Towers
MWS-GTK-AL-ST Aluminum, Steel and Glue Dent Repair Station
Pro Spot publishes the MWS-GTK-AL-ST station for aluminum, steel and glue dent work in the same area.
Ways to Expand the Workflow
Equipment to review when expanding this workflow.
- View details for Pro Spot PR-3 Multi Task Automatic Steel Dent Repair System
Pro Spot
Steel Dent Repair
PR-3 Multi Task Automatic Steel Dent Repair System
Pro Spot publishes the PR-3 automatic steel dent repair system for steel panel work.
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.