Pro Spot
PR-3 Multi Task Automatic Steel Dent Repair System
Steel Dent Repair
The PR-3 is a versatile resistance welder for light welding and dent pulling: shrinking, single-sided spot welding, attaching threaded studs, nuts and windshield mounting clip rivets, and patchwork welding. The PR-3 Auto senses when a weld tip or pull key makes contact and welds automatically after a short delay, and it uses minimal heat compared with other welding methods, so there is less cleanup afterward.
Key specifications
- Input
- 1 phase; 208-230V; 24A
- Input cable
- 30 ft (9 m)
- Output amperage
- 2,000A max at tips
- Weight
- 80 lb (36 kg)
- Dimensions
- 18 x 14 x 12 in (458 x 356 x 305 mm)
- Welding cable
- 8 ft (2.5 m)
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
- Output amperage
- 2,000A max at tips
- Weight
- 80 lb (36 kg)
- Dimensions
- 18 x 14 x 12 in (458 x 356 x 305 mm)
What TAG confirms with you
- Tools and machines that will run on the system, and how many at once
- Electrical service available at the compressor location
- Air quality needed downstream — drying, filtration or paint-grade air
- Existing piping, tank and drain arrangements you want to keep
- Where the equipment can sit for noise, heat and service access
System Specifications
- 1 phase; 208-230V; 24A
- 30 ft (9 m)
- 2,000A max at tips
- 8 ft (2.5 m)
- 80 lb (36 kg)
- 18 x 14 x 12 in (458 x 356 x 305 mm)
What ships with it
The sheet footnotes that the PR-2B cart is included with specific configurations only. SA-0199 ships as a complete accessory kit; the sheet's SA-0199 contents matrix is not re-keyed as separate shipped items.
- Supplied components
- 6
- Listed as optional
- 8
Included components (6 items)
- PR-3 Auto1 ea.
- PR-3 GunPart no. SA-01551 ea.
- PR-3 Cart Kit (included with specific configurations)Part no. PR-2B1 ea.
- Accessories kitPart no. SA-01991 ea.
- ManualPart no. MNL-PR-31 ea.
- Spot HammerPart no. CLP-701 ea.
Listed as optional
- Pull Bar - QuadrupedalPart no. PB-10
- Pull Bar, BipedalPart no. PB-11
- Pivot PullerPart no. PB-20
- Pull GunPart no. PRO-65
- Dent Puller, SteelPart no. PRO-66
- Lever BarPart no. CLP-73
- Weld On ShaftPart no. CLP-110
- T-dent Auto Weld Key Handle (11' Cable)Part no. SA-0154
Shipping data
- Shipping dimensions, with cart (2 boxes)
- 23" x 15" x 7" (cart) and 24" x 15" x 14" (PR-3)
- Shipping weight, with cart
- 22 lbs / 10 kg (cart) and 87 lbs / 39 kg (PR-3)
- Shipping dimensions, without cart (1 box)
- 24" x 15" x 14"
- Shipping weight, without cart
- 87 lbs / 39 kg
Configure this PR-3 Multi Task Automatic Steel Dent Repair System
Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
Accessories for PR-3 Multi Task Automatic Steel Dent Repair System
18 of 18 shown
Optional accessory · 18
Optional accessory
Pro Spot SA-0154 T-Dent Auto Weld Key Handle, 11 ft Cable
Part no. SA-0154
Optional accessory
Pro Spot PB-LITE Pull Bar System
Part no. PB-LITE
Optional accessory
Pro Spot Spot Hammer Assembly
Part no. CLP-70
Optional accessory
Pro Spot CLP-80 Lever Bar with 4-Hook and Single Hook
Part no. CLP-80
Optional accessory
Pro Spot PB-11 Pull Bar, Two-Footed
Part no. PB-11
Optional accessory
Pro Spot Pro-65 Pull Gun
Part no. Pro-65
Compatible consumables
Nail 2.5x50mm (pk. 50)
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 50 pack
Weld-On Pull Tab
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 50 pack
Moulding Clip Rivet 3x3.2 (pk.100)
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 100 pack
Twisted Weld-On Pull Tab
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 50 pack
Weld-On Bolt - M5x12 (pk. 50)
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 50 pack
Weld-On Nut (pk. 20)
Steel & Single-Sided Dent Repair · Single-Sided Fasteners · 20 pack
Build out this work area
Related Equipment to Review
Related equipment to review for this work area.
- View details for Pro Spot MWS-ST Steel Dent Pulling Station
Pro Spot
Steel Dent Repair
MWS-ST Steel Dent Pulling Station
Pro Spot publishes the MWS-ST steel dent pulling station for the same steel panel work.
Ways to Expand the Workflow
Equipment to review when expanding this workflow.
- View details for Pro Spot IH-500 Induction Heater
Pro Spot
Dent Repair
IH-500 Induction Heater
Pro Spot publishes the IH-500 induction heater for heat work in the same repair area.
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.