Skip to content

Se habla español

TAG Auto Equipment
Back to Glue Dent Pulling
Pro Spot MWS-GTK Glue Dent Pulling Station

Pro Spot

MWS-GTK Glue Dent Pulling Station

Glue Dent Pulling

The MWS-GTK is a dent repair station built around the Glue Tab Dent Repair Kit. It works on aluminum and steel, including painted surfaces, with no grinding and no panel removal, using multiple pull accessories and reusable pull tabs.

Key specifications

Weight
275 lb (124.7 kg)
Dimensions
32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
Specifications
Quantity
1
Request a Quote

Nothing is purchased online. TAG confirms configuration with you.

Not in your project yet

Configure This ModelRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Dimensions
32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
Weight
275 lb (124.7 kg)

What TAG confirms with you

  • Tools and machines that will run on the system, and how many at once
  • Electrical service available at the compressor location
  • Air quality needed downstream — drying, filtration or paint-grade air
  • Existing piping, tank and drain arrangements you want to keep
  • Where the equipment can sit for noise, heat and service access

System Specifications

Dimensions
32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
Weight
275 lb (124.7 kg)

What ships with it

110V configuration only. The IR thermometer is printed as "ea." with no numeral, so no quantity is shown.

Supplied components
33
Listed as optional
1
Included components (33 items)
  • MWS-GTK MWS-G2 Base Cart, One HandlePart no. SA-0904
  • Tool Board ExpansionPart no. SA-0695
  • Folding TablePart no. SA-0678
  • Modular Drawer Kit with DividersPart no. SA-0911
  • Handle BarPart no. 90-0769
  • 110V Power Strip, 6-Outlet, 2-USBPart no. 63-00331 ea.
  • Rubber Mat 18 X 26Part no. 90-22001 ea.
  • Glue Tab Kit (110V)Part no. PRO-GTK1 ea.
  • Pull Bar 4-footedPart no. PB-101 ea.
  • Pivot PullerPart no. PB-201 ea.
  • Pull Gun AssemblyPart no. PRO-651 ea.
  • Nut Screw #12 X 1/2", ZINCPart no. S-121228 ea.
  • Tool board NutPart no. 52-321128 ea.
  • Single HookPart no. 90-01975 ea.
  • Double HookPart no. 90-01981 ea.
  • Gun HookPart no. 90-01991 ea.
  • Snap HookPart no. 90-02116 ea.
  • Glue Gun HolsterPart no. 90-26291 ea.
  • Glue Stick HolsterPart no. 90-26671 ea.
  • Heat Gun HolsterPart no. 90-26681 ea.
  • Spray Bottle HolsterPart no. 90-27021 ea.
  • Slide Hammer with HookPart no. CLP-711 ea.
  • AL Hammers, 3-piece setPart no. SA-00321 ea.
  • 7pc Steel Hammer & Dollie SetPart no. 85-12771 ea.
  • Pull Rod Kit, 5/16 Diameter - 4pkPart no. PRO-PRX41 ea.
  • Lever Bar w/ 4-Hook and Single HookPart no. CLP-801 ea.
  • High Strength Formula GluePart no. 84-8002-20PK1 ea.
  • 3D Glue TabsPart no. PRO-GT3D1 ea.
  • Universal Flat Glue Tabs (18PC kit)Part no. PRO-GTFT1 ea.
  • IR ThermometerPart no. 85-0421
  • Heat Gun (110V)Part no. 85-02001 ea.
  • Cool Gel Heat Barrier SprayPart no. 89-15091 ea.
  • Traction Nail and Knob PullerPart no. 90-25461 ea.

View full component sheet

Listed as optional

The manufacturer prints these as optional — they are not included with the machine. TAG confirms exactly what is on your project before quoting.

  • Dust CoverPart no. 80-0005

Source: Pro Spot MWS-GTK-110V-C, Components List CL-MWS-GTK-110V-F.

Configure this MWS-GTK Glue Dent Pulling Station

Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Compatible consumables

TAG confirms final fit and configuration before purchase.

  • Pro Spot Glue Sticks, High Strength (20pk), part number 84-8002-20PK

    84-8002-20PK

    Glue Sticks, High Strength (20pk)

    Glue Dent Pulling · Glue · 20 pack

    Choose Options

View all 1 consumables for this machine

Build out this work area

Ways to Expand the Workflow

Equipment to review when expanding this workflow.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop