Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to Sanding & Dust Extraction
Pro Spot Dust-Free Sanding Systems (DE-PRO, DE-COMBI, DE-DA, Abrasives)

Pro Spot

Dust-Free Sanding Systems (DE-PRO, DE-COMBI, DE-DA, Abrasives)

Sanding & Dust Extraction

The Dust-Free Sanding Systems collect dust as you sand and direct it into a disposable bag. They use 5–7 CFM of air and have no electrical motors or parts. Choose from DE-Combi, DE-Pro and DE-DA systems, with i-Grit and SANDamigo abrasives. Tell us about your sanding work so we can help you choose a setup.

Model

Choose a model to add this product to your project.

Airflow
5-7 CFM
Dimensions
24 x 13 x 31 in
Weight
32 lb (14.5 kg)

Key specifications

DE-PRO weight
32 lb (14.5 kg)
DE-COMBI weight
37 lb (17 kg)
DE-DA weight
14 lb (6.4 kg)
DE-PRO dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
DE-COMBI dimensions
13.7 L x 7.5 W x 10.8 H in (348 x 191 x 275 mm)
DE-DA dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a model above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

DE-PRO dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
DE-PRO weight
32 lb (14.5 kg)
DE-COMBI dimensions
13.7 L x 7.5 W x 10.8 H in (348 x 191 x 275 mm)
DE-COMBI weight
37 lb (17 kg)
DE-DA dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
DE-DA weight
14 lb (6.4 kg)

What TAG confirms with you

  • Tools and machines that will run on the system, and how many at once
  • Electrical service available at the compressor location
  • Air quality needed downstream — drying, filtration or paint-grade air
  • Existing piping, tank and drain arrangements you want to keep
  • Where the equipment can sit for noise, heat and service access
Ask TAG about this model

Same published airflow

Both extraction units publish 5-7 CFM.

Bench or portable footprint

DE-PRO measures 24 x 13 x 31 in; DE-COMBI measures 13.7 L x 7.5 W x 10.8 H in.

Source-locked catalog data

Values are published on Pro Spot 2025-2026 Product Catalog pages 127 and 129.

System Specifications

DE-PRO: 5-7 CFM airflow; 24 x 13 x 31 in (610 x 330 x 788 mm) dimensions; 32 lb (14.5 kg).

ConfigurationAirflowDimensionsWeight
DE-PRO5-7 CFM24 x 13 x 31 in32 lb (14.5 kg)
DE-COMBI5-7 CFM13.7 x 7.5 x 10.8 in37 lb (17 kg)
DE-PRO airflow
5-7 CFM
DE-PRO dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
DE-PRO weight
32 lb (14.5 kg)
DE-COMBI airflow
5-7 CFM
DE-COMBI dimensions
13.7 L x 7.5 W x 10.8 H in (348 x 191 x 275 mm)
DE-COMBI weight
37 lb (17 kg)
DE-DA airflow
5-7 CFM
DE-DA dimensions
24 x 13 x 31 in (610 x 330 x 788 mm)
DE-DA weight
14 lb (6.4 kg)

Configure this Dust-Free Sanding Systems (DE-PRO, DE-COMBI, DE-DA, Abrasives)

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for Dust-Free Sanding Systems (DE-PRO, DE-COMBI, DE-DA, Abrasives)

TAG confirms final fit and configuration before purchase.

39 of 39 shown

Optional accessory · 39

  • Optional accessory

    Pro Spot Dual Action Air Sander, 6"Dia. 7mm Orbit

    Part no. 84-6013

    Optional 6 inch dual-action vacuum sander with a 7 mm orbit for the dust-free sanding system.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Dual Action Air Sander, 6"Dia. 3mm Orbit

    Part no. 84-6014

    Optional 6 inch dual-action vacuum sander with a 3 mm orbit for the dust-free sanding system.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot 16" File Board

    Part no. 84-6016

    Optional 16 inch file board for the Pro Spot dust-free sanding system.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot 6" Disc Hand Block

    Part no. 84-6056

    Hand sanding block that adapts 6 in. multi-hole discs for use with the Pro Spot DE-COMBI dust extraction system.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot Action Air Sander, 6"Dia. 5mm Orbit

    Part no. 84-6001

    Pro Spot 84-6001 — Action Air Sander, 6"Dia. 5mm Orbit. Stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details

  • Optional accessory

    Pro Spot 21-Hole Sanding Pad, 6"Dia.

    Part no. 84-6015

    Pro Spot 84-6015 — 21-Hole Sanding Pad, 6"Dia.. Stocked and supplied by TAG Auto Equipment.

    Fits this model.

    Full Details
My TAG Project (0)

Compatible consumables

TAG confirms final fit and configuration before purchase.

  • Pro Spot Abrasive Sheet, i-Grit - 2-3/4 x 16" Multi-Hole Sheet, part number 50-4016-080

    50-4016-080

    Abrasive Sheet, i-Grit - 2-3/4 x 16" Multi-Hole Sheet

    Sanding & Dust Extraction · Dust-Free Sanding Consumables · 50 pack

    Choose Options
  • Pro Spot Abrasive Sheet, i-Grit - 2-3/4 x 16" Multi-Hole Sheet — P240, part number 50-4016-240

    50-4016-240

    Abrasive Sheet, i-Grit - 2-3/4 x 16" Multi-Hole Sheet — P240

    Sanding & Dust Extraction · Dust-Free Sanding Consumables · 50 pack

    Choose Options
  • Pro Spot Abrasive Disc, i-Grit - 3" Disc, part number 50-4010-320

    50-4010-320

    Abrasive Disc, i-Grit - 3" Disc

    Sanding & Dust Extraction · Dust-Free Sanding Consumables · 50 pack

    Choose Options
  • Pro Spot SANDamigo 6 in Abrasive Disc, 600 Grit, part number 50-4007-600

    50-4007-600

    SANDamigo 6 in Abrasive Disc, 600 Grit

    Sanding & Dust Extraction · SANDamigo Abrasives · 50 pack

    Choose Options
  • Pro Spot SANDamigo 6 in Abrasive Disc, 320 Grit, part number 50-4007-320

    50-4007-320

    SANDamigo 6 in Abrasive Disc, 320 Grit

    Sanding & Dust Extraction · SANDamigo Abrasives · 50 pack

    Choose Options
  • Pro Spot i-Grit 6 in Abrasive Disc, P320, part number 50-4008-320-A

    50-4008-320-A

    i-Grit 6 in Abrasive Disc, P320

    Sanding & Dust Extraction · i-Grit Abrasives · 50 pack

    Choose Options

View all 31 consumables for this machine

Build out this work area

Related Equipment to Review

Related equipment to review for this work area.

Ways to Expand the Workflow

Equipment to review when expanding this workflow.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop