Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to Wheel Balancers
Hunter Engineering Road Force WalkAway® Wheel Balancer

Hunter Engineering

Road Force WalkAway® Wheel Balancer

Wheel Balancers

This diagnostic wheel balancer combines Road Force® measurement with the autonomous WalkAway™ inflation system: the air chuck releases on its own when inflation is complete, so the technician can move on. It uses the diagnostic load roller to solve vibration problems.

Finish

Choose a factory finish to add this product to your project.

Finish availability can change by model, series and production run. TAG confirms current factory finish availability with the manufacturer before ordering.

Key specifications

Capability
Road Force® test and balance; diagnostic load roller for vibration diagnosis and match-mounting
Patented vision system
Automatic wheel dimension measurement
CenteringCheck®
Automatic centering verification on every spin
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a factory finish above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

What TAG confirms with you

  • Wheel and tire sizes you service, including any oversize work
  • Bay space and clearance around the machine for loading wheels
  • Electrical service and air supply at that position
  • Daily volume and how many technicians share the machine
  • Delivery access and installation scope
Ask TAG about this model

Wheel & Rim Capacity

Capability
Road Force® test and balance; diagnostic load roller for vibration diagnosis and match-mounting
WalkAway™ inflation
Chuck releases automatically after inflation; inflates and measures unbalance without the technician present; Hunter reports savings of up to 15 minutes on a door-to-door four-tire changeover and up to 44% time savings when paired with Revolution™
Patented vision system
Automatic wheel dimension measurement
CenteringCheck®
Automatic centering verification on every spin

Additional details

  • SmartWeight® technology; weight locations identified anywhere along the wheel
  • TPMSpecs® on-board vehicle database
  • eCal patented self-calibration
  • HunterNet® 2 online portal for revenue, results and ROI tracking

Configure this Road Force WalkAway® Wheel Balancer

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for Road Force WalkAway® Wheel Balancer

TAG confirms final fit and configuration before purchase.

Optional accessory · 10

  • Optional accessory

    Hunter Engineering BullsEye® Collet and Storage Kit

    Part no. 20-2765-1

    BullsEye® collet kit with cone carrier, clamping cup, protector sleeve and performance wheel / light-truck spacer for Elite series balancers.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering Calibration Tool for Load Roller and Dataset® Arms

    Part no. 221-672-1

    Calibration tool for balancer load roller and Dataset® arms.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering HammerHead® Top-Dead-Center Clip-Weight Laser System

    Part no. 20-3765-1

    Projects laser lines on the rim flange for precise clip-weight application and includes an overhead work light. Can be ordered with a balancer or as a separate line item.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering BullsEye® Pro Collet and Storage Kit

    Part no. 20-3777-1

    Same contents as the 20-2765-1 BullsEye® kit plus the 20-3698-1 adjustable flange plate and stud kit.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering BullsEye® Collet Set

    Part no. 20-2683-1

    Ten dual-taper collets covering 2.10 in. to 5.33 in. (53 mm to 135 mm) for passenger-car and light-truck wheels.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering TruckChuck™ Wheel and Drum Balancing Kit

    Part no. 20-1602-1

    Three-jaw chuck adaptor for factory steel and some aluminum wheels with centering holes from 3.13 in. to 7.13 in.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering Three-jaw chuck adaptor

    Part no. 175-286-2

    Three-jaw chuck adaptor in Hunter's TruckChuck wheel and drum balancing kit. Jaw kits are separate components.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering Cone: 2.10 in. to 2.43 in. (53 mm-62 mm)

    Part no. 192-249-1

    BullsEye wheel centering collet with a 2.10 to 2.43-inch range, part of Hunter's 20-2683-1 collet set.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering Cone: 2.44 in. to 2.79 in. (62 mm-71 mm)

    Part no. 192-250-1

    BullsEye wheel centering collet with a 2.44 to 2.79-inch range, part of Hunter's 20-2683-1 collet set.

    Fits this model.

    Full Details

  • Optional accessory

    Hunter Engineering Cone: 2.71 in. to 3.11 in. (69 mm-79 mm)

    Part no. 192-251-1

    BullsEye wheel centering collet with a 2.71 to 3.11-inch range, part of Hunter's 20-2683-1 collet set.

    Fits this model.

    Full Details
My TAG Project (0)

Build out this work area

Related Equipment to Review

Related equipment to review for this work area.

Ways to Expand the Workflow

Equipment to review when expanding this workflow.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop