Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to ADAS
Hunter Engineering DAS 3000 Static ADAS Calibration System

Hunter Engineering

DAS 3000 Static ADAS Calibration System

ADAS

DAS 3000 and DASLDW are static ADAS calibration fixtures used with ADASLink® for camera-guided positioning, target placement and calibration documentation. The two configurations differ in capability and included components, so talk with us about the target and accessory kit, vehicle coverage and site requirements for the calibrations you plan to do.

Model

Choose a model to add this product to your project.

Configuration
Static ADAS fixture
Coverage
Forward camera and radar with flat plate
Workflow
Used with Hunter ADASLink
General minimum planning area
25 ft. × 34 ft.

Key specifications

System type
Static ADAS calibration fixture, offered in DAS 3000 and DASLDW configurations
DAS 3000 configuration
Forward-facing camera and radar, rear camera and radar, and side camera and radar
DASLDW configuration
Forward-facing camera and forward-facing radar with a flat plate
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a model above before adding this product to your project.

Not in your project yet

Configure This ModelRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

What TAG confirms with you

  • Bay length, width and clear floor area available for target placement
  • Floor levelness and lighting in the area used for calibrations
  • Vehicles and brands you calibrate most often, so target kits can be matched
  • Where the console and wheel targets will be stored between jobs
  • Whether calibrations happen in a dedicated bay or share an alignment bay
  • Network access and electrical service at the calibration position
Ask TAG about this model

Two configurations

Hunter offers the static ADAS calibration fixture in DAS 3000 and DASLDW configurations.

ADASLink® workflow

Used with Hunter ADASLink® for guided fixture positioning, target placement, diagnostic scans and calibration documentation.

planning guidance

Hunter's General ADAS Site Guidelines list 25 ft. × 34 ft. minimum, 30 ft. × 45 ft. recommended and 40 ft. × 60 ft. optimal floor space.

Measurement & Coverage

DASLDW: Hunter lists forward-facing camera and forward-facing radar with a flat plate. Actual target and accessory kit contents vary by configuration — TAG confirms the exact kit, ADASLink requirements and site conditions before purchase.

ConfigurationConfigurationCoverageWorkflowGeneral minimum planning area
DASLDWStatic ADAS fixtureForward camera and radar with flat plateUsed with Hunter ADASLink25 ft. × 34 ft.
System type
Static ADAS calibration fixture, offered in DAS 3000 and DASLDW configurations
Workflow
Used with Hunter ADASLink® for guided fixture positioning, target placement, diagnostic scans and calibration documentation
DAS 3000 configuration
Forward-facing camera and radar, rear camera and radar, and side camera and radar
DASLDW configuration
Forward-facing camera and forward-facing radar with a flat plate
Expansion options
Optional forward-facing radar with corner cube, blind-spot radar with corner cube, and surround-view / 360 camera procedures with floor mats
Typical components
Main fixture with guides, radar reflectors, target boards, wheel-clamp markers, distance markers and target storage; actual kit contents vary by configuration
General planning guidance
Hunter’s General ADAS Site Guidelines list 25 ft. × 34 ft. minimum, 30 ft. × 45 ft. recommended and 40 ft. × 60 ft. optimal floor space

Additional details

  • Calibration work depends on the vehicle procedure, your floor, lighting and utilities. We will confirm the target and accessory kit, ADASLink requirements, training, any subscriptions, installation and price before anything is ordered.

Configure this DAS 3000 Static ADAS Calibration System

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Compatible accessories

TAG confirms final fit and configuration before purchase.

Optional accessory · 1

Fits across the range

Manufacturer-listed for the Hunter ADAS range rather than for one exact model. TAG confirms final fit and configuration before purchase.

Build out this work area

Related Equipment to Review

Related equipment to review for this work area.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop