Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to short-mid-rise-lifts
Challenger Lifts SRM10 10K Short-Rise Lift

Challenger Lifts

SRM10 10K Short-Rise Lift

short-mid-rise-lifts

Challenger's SRM10 short-rise lift has a 10,000 lb. capacity and a 22" raised height for quick-turn service work. It comes standard with two-position spotting blocks to reach pickup points on a wider range of vehicles, uses three locking positions, has a powder-coated finish, and can be mounted flush with the floor.

Key specifications

Lifting capacity
10,000 lbs.
Raised height
22"; lowered height 4.25"
Locking bar heights
13.75", 18.325", 21.25"
Overall width
85" (+2.5" for handle); outside width of platforms 72"; 23" between platforms
Model
SRM10
Adapter positions
4.75" low / 6.75" high
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Not in your project yet

Configure This ModelRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
10,000 lbs.
Overall width
85" (+2.5" for handle); outside width of platforms 72"; 23" between platforms

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

Capacity & Dimensions

Model
SRM10
Lifting capacity
10,000 lbs.
Raised height
22"; lowered height 4.25"
Locking bar heights
13.75", 18.325", 21.25"
Adapter positions
4.75" low / 6.75" high
Overall width
85" (+2.5" for handle); outside width of platforms 72"; 23" between platforms
Platform length
50"; ramp and platform overall length 82.5"; overall length 92.875"
Rearward movement
13.25"
Motor
1HP, 115v, 60Hz, 1Ph

Additional details

  • Challenger lists this model as ALI/ETL certified

Configure this SRM10 10K Short-Rise Lift

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Compatible accessories

TAG confirms final fit and configuration before purchase.

Optional accessory · 1

Build out this work area

Upgrade Options to Review

Another option to compare in the same line.

Final configuration is confirmed before purchase.

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelChallenger Lifts
SRM10 10K Short-Rise LiftYou are viewing		Challenger Lifts
MR6 6K Portable Mid-Rise Lift
Why TAG lists itThis modelChallenger publishes MR6 as a 6K portable mid-rise platform. Compare before choosing.
ModelSRM10MR6
Lifting capacity10,000 lbs.6,000 lbs.
Motor1HP, 115v, 60Hz, 1Ph1HP, 115V, 60Hz, 1Ph

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop