Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to In-Ground Lifts
Challenger Lifts EV1020 Series 10K Standard Inground Lift

Challenger Lifts

EV1020 Series 10K Standard Inground Lift

In-Ground Lifts

Challenger's electric hydraulic cassette-style inground lift series: 10,000 lb. capacity with 3-stage front and rear arms, or a fixed drive-on pad (XP9) configuration at 9,000 lbs. Quick Cycle™ (QC) models rise in 27 seconds and lower in 17 seconds.

Finish

Choose a factory finish to add this product to your project.

Finish availability can change by model, series and production run. TAG confirms current factory finish availability with the manufacturer before ordering.

Model

Choose a model to add this product to your project.

Capacity
10,000 lbs.
Rise height
78"
Stroke
72"
Speed of rise
38 s

Key specifications

Lifting capacity
10,000 lbs. (EV1020 / EV1020-QC); 9,000 lbs. (XP9 drive-on pad models)
Capacity per point
2,500 lbs. per arm (EV1020 models); 4,500 lbs. per pad (XP9 models)
Rise height
78" (EV1020 models); 70" (XP9 models)
Speed of rise
38 s standard; 27 s on Quick Cycle™ (QC) models
Screw pad height
3.875"–6" (EV1020 models); minimum pad height 2.25" (XP9 models)
Width overall
97" (EV1020 models); 79.75" (XP9 models)
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a factory finish above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
10,000 lbs. (EV1020 / EV1020-QC); 9,000 lbs. (XP9 drive-on pad models)
Width overall
97" (EV1020 models); 79.75" (XP9 models)
Drive-thru clearance
87" (EV1020 models)
Capacity per point
2,500 lbs. per arm (EV1020 models); 4,500 lbs. per pad (XP9 models)
Motor / voltage
2HP, 208v–230v, 60Hz, 1Ph
Air required
90–120 psi

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

Arms or drive-on pads

EV1020 and EV1020-QC publish 3-stage front / 3-stage rear arms; XP9 models publish a drive-on pad.

Quick Cycle™ option

Speed of rise is 38 s standard and 27 s on Quick Cycle™ (QC) models.

Sealed cassette

Fully-contained and sealed recycled polymer cassette tub, with a mechanical lock that engages every 3".

Capacity & Dimensions

EV1020: 10,000 lbs. lifting capacity; 78" rise height; 72" stroke; 38 s speed of rise; 2HP, 208v–230v, 60Hz, 1Ph motor.

ConfigurationCapacityRise heightStrokeSpeed of rise
EV102010,000 lbs.78"72"38 s
EV1020-QC10,000 lbs.78"72"27 s
EV1020XP99,000 lbs.70"68"38 s
EV1020XP9-QC9,000 lbs.70"68"27 s
Models listed by Challenger
EV1020, EV1020-QC, EV1020XP9, EV1020XP9-QC
Lifting capacity
10,000 lbs. (EV1020 / EV1020-QC); 9,000 lbs. (XP9 drive-on pad models)
Arms
3-stage front / 3-stage rear (EV1020, EV1020-QC); drive-on pad on XP9 models
Stroke
72" (EV1020 models); 68" (XP9 models)
Rise height
78" (EV1020 models); 70" (XP9 models)
Width overall
97" (EV1020 models); 79.75" (XP9 models)
Drive-thru clearance
87" (EV1020 models)
Arm reach
19.625" minimum / 42.125" maximum (EV1020 models)
Screw pad height
3.875"–6" (EV1020 models); minimum pad height 2.25" (XP9 models)
Capacity per point
2,500 lbs. per arm (EV1020 models); 4,500 lbs. per pad (XP9 models)
Guide plunger diameter
8.5"
Motor / voltage
2HP, 208v–230v, 60Hz, 1Ph
Speed of rise
38 s standard; 27 s on Quick Cycle™ (QC) models
Air required
90–120 psi
ALI/ETL certified
Yes (as listed by Challenger)
Available colors
Black, Red, Blue

Additional details

  • Mechanical lock engages every 3"
  • Fully-contained and sealed recycled polymer cassette tub

Configure this EV1020 Series 10K Standard Inground Lift

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for EV1020 Series 10K Standard Inground Lift

TAG confirms final fit and configuration before purchase.

Optional accessory · 5

  • Optional accessory

    Challenger Lifts GM Truck Footpad Set (B2280PR)

    Part no. B2280PR

    Drop-in wide-frame footpads that prepare a Challenger lift for 2019 and newer GM half-ton pickup trucks. Challenger notes the front frame rails on these trucks are wider, which required a new footpad, and that using the standard footpads can cause damage to the frame at this lifting point. Only one pair is needed for the front section of the truck when lifting. Fits Cadillac, Chevrolet and GMC trucks.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Electric Vehicle Footpad Kit (EVFPK)

    Part no. EVFPK

    Challenger footpad kit designed to support select electric vehicles. Fits most Challenger two-post lifts. Sold in sets of four.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Standard Footpad (B2270)

    Part no. B2270

    Premium telescoping polyurethane footpad, the standard pad for most Challenger lifts. The pads screw up and down so technicians can reach a variety of lift points on many different vehicle types. Sold individually.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Round Rubber Footpad (B2260)

    Optional round rubber double telescoping footpad. Fits all 10K, 12K and 16K inground and above ground lifts. Sold individually.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Light Bar Kit (EAK0361V64A-US)

    Part no. EAK0361V64A-US

    LED light bars that come in pairs, feature motion detection, are 27" long and include 10400 mAh rechargeable batteries. The strong magnets place light in many different areas of a shop, output is adjustable from 100 to 1000 lumens, and the ends rotate 360 degrees.

    Fits this model.

    Full Details
My TAG Project (0)

Build out this work area

Upgrade Options to Review

Another option to compare in the same line.

Final configuration is confirmed before purchase.

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelChallenger Lifts
EV1020 Series 10K Standard Inground LiftYou are viewing		Challenger Lifts
EW10 Series 10K Wide Inground Lift
Why TAG lists itThis modelChallenger publishes the EW10 series as a 10K wide inground platform. Compare before choosing.
Lifting capacity10,000 lbs. (EV1020 / EV1020-QC); 9,000 lbs. (XP9 drive-on pad models)10,000 lbs.
Arms3-stage front / 3-stage rear (EV1020, EV1020-QC); drive-on pad on XP9 models3-stage front / 3-stage rear
Stroke72" (EV1020 models); 68" (XP9 models)72"
Rise height78" (EV1020 models); 70" (XP9 models)78"
Width overall97" (EV1020 models); 79.75" (XP9 models)118"
Drive-thru clearance87" (EV1020 models)88"

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop