Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to two-post-lifts
Challenger Lifts CLFP9 9K Two-Post Lift / Open-Top / Floor Plate

Challenger Lifts

CLFP9 9K Two-Post Lift / Open-Top / Floor Plate

two-post-lifts

Challenger's 9,000 lb. capacity open-top floor plate two-post lift with a 10' 7/8" overall column height, intended for low ceiling applications. 3-stage front and rear arms provide arm sweep, retraction and reach, and a low-profile drive-over floor plate assists vehicle positioning. The CLFP9 also uses double-telescoping screw footpads, a powder coat finish and plated arm pins.

Finish

Choose a factory finish to add this product to your project.

Finish availability can change by model, series and production run. TAG confirms current factory finish availability with the manufacturer before ordering.

Key specifications

Lifting capacity
9,000 lbs.
Lifting configuration
Symmetric
Rise height
78.125"
Speed of rise
50 s
Overall height
120.875"
Screw pad height
4" – 5.875"
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a factory finish above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
9,000 lbs.
Overall height
120.875"
Overall width
137.5"
Drive-thru clearance
98.187"
Ceiling height required
10' 2"

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

Capacity & Dimensions

Lifting capacity
9,000 lbs.
Lifting configuration
Symmetric
Arms
3-stage front / 3-stage rear
Rise height
78.125"
Overall height
120.875"
Overall width
137.5"
Drive-thru clearance
98.187"
Front and rear arm reach
24.5" – 44.5"
Screw pad height
4" – 5.875"
Inside columns
109"
Motor
2HP, 208v-230v, 60Hz, 1Ph
Speed of rise
50 s
Ceiling height required
10' 2"
Available colors
Blue, Red

Configure this CLFP9 9K Two-Post Lift / Open-Top / Floor Plate

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for CLFP9 9K Two-Post Lift / Open-Top / Floor Plate

TAG confirms final fit and configuration before purchase.

Optional accessory · 6

  • Optional accessory

    Challenger Lifts Air & Electric Workstation (B10264A)

    Part no. B10264A

    Challenger workstation that provides electricity and air mounted directly to the lift column, keeping both at the technician's work area.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts GM Truck Footpad Set (B2280PR)

    Part no. B2280PR

    Drop-in wide-frame footpads that prepare a Challenger lift for 2019 and newer GM half-ton pickup trucks. Challenger notes the front frame rails on these trucks are wider, which required a new footpad, and that using the standard footpads can cause damage to the frame at this lifting point. Only one pair is needed for the front section of the truck when lifting. Fits Cadillac, Chevrolet and GMC trucks.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Standard Footpad (B2270)

    Part no. B2270

    Premium telescoping polyurethane footpad, the standard pad for most Challenger lifts. The pads screw up and down so technicians can reach a variety of lift points on many different vehicle types. Sold individually.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Electric Vehicle Footpad Kit (EVFPK)

    Part no. EVFPK

    Challenger footpad kit designed to support select electric vehicles. Fits most Challenger two-post lifts. Sold in sets of four.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts 7K Turf Rail (TR07)

    Part no. TR07

    Challenger Turf Rail picks up turf and all-terrain equipment by wheel engagement. The patented system uses two rails that engage onto the height adapters of most two-post, symmetrically installed lifts. Two trays then attach to the rails and are fully adjustable from 26" to 116" wheelbases. Challenger positions the kit for airports, golf courses, parks and landscape companies.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Light Bar Kit (EAK0361V64A-US)

    Part no. EAK0361V64A-US

    LED light bars that come in pairs, feature motion detection, are 27" long and include 10400 mAh rechargeable batteries. The strong magnets place light in many different areas of a shop, output is adjustable from 100 to 1000 lumens, and the ends rotate 360 degrees.

    Fits this model.

    Full Details
My TAG Project (0)

Build out this work area

Upgrade Options to Review

Another option to compare in the same line.

Final configuration is confirmed before purchase.

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelChallenger Lifts
CLFP9 9K Two-Post Lift / Open-Top / Floor PlateYou are viewing		Challenger Lifts
CL10A-XP9 9K Two-Post Drive-On Pad Lift
Why TAG lists itThis modelChallenger publishes CL10A-XP9 as a 9K drive-on pad approach. Compare against an open-top floor-plate lift.
Lifting capacity9,000 lbs.9,000 lbs.
Lifting configurationSymmetricDrive-on express pad
Rise height78.125"70"
Overall height120.875"140" (143" cylinder extended); 2' and 3' height extensions available
Overall width137.5"138.5"
Drive-thru clearance98.187"90"

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop