Pro Spot
PR-191 Multiprocess Welder
MIG Welding
The PR-191 is a multiprocess inverter welder that handles MIG, MMA (stick) and TIG welding, with Synergic MIG technology, Advanced Lift ARC for TIG, MMA anti-sticking, gas and no-gas (flux-cored) capability, a metallic 2-roll wire feed system for 1 to 5 kg spools, a line voltage compensation filter with generator compatibility and an integrated digital display.
Key specifications
- Amp. min-max
- MIG 25 - 180 A | MMA 20 - 180 A | TIG 5 - 180 A
- Power 60%
- MIG 4.8 KW | MMA 4.8 KW | TIG 4.8 KW
- Input voltage (1ph)
- 230V - 50/60Hz
- No load output voltage
- MIG 70 V | MMA 70 V | TIG 70 V
- Insulation class
- H
- Protection degree
- IP 22S
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
- Input voltage (1ph)
- 230V - 50/60Hz
- Power 60%
- MIG 4.8 KW | MMA 4.8 KW | TIG 4.8 KW
- No load output voltage
- MIG 70 V | MMA 70 V | TIG 70 V
- Amp. min-max
- MIG 25 - 180 A | MMA 20 - 180 A | TIG 5 - 180 A
- Weight box/net
- 32.6 lbs / 14.8 kg
What TAG confirms with you
- Incoming power at the weld station: voltage, phase and breaker size
- Materials you repair — steel, high-strength steel, aluminium or a mix
- Processes you need to cover, such as squeeze-type resistance, MIG or brazing
- Whether aluminium work must be isolated from steel work
- Fume extraction and ground/clamp access around the vehicle
Welding Output & Power
- 230V - 50/60Hz
- MIG 4.8 KW | MMA 4.8 KW | TIG 4.8 KW
- MIG 70 V | MMA 70 V | TIG 70 V
- MIG 25 - 180 A | MMA 20 - 180 A | TIG 5 - 180 A
- MIG 180A @ 30%, 105A @ 60%, 75A @ 100% | MMA 180A @ 20%, 105A @ 60%, 75A @ 100% | TIG 180A @ 30%, 105A @ 60%, 75A @ 100%
- H
- IP 22S
- 9x16x16 in (230x400x400 mm)
- 32.6 lbs / 14.8 kg
What ships with it
The sheet separates supplied items from parts shipped inside the welder; both are supplied with the machine.
- Supplied components
- 17
- Listed as optional
- 0
Included components (17 items)
- Ergonomic Steel MIG Torch (Green), 9 ft. cable lengthPart no. 82-70161 ea.
- Mild Steel Welding Wire 0.8mm, 5kgPart no. 50-72081 ea.
- Gas RegulatorPart no. 82-70011 ea.
- ManualPart no. MNL-PR-1911 ea.
- Inside the welder — Ground CablePart no. 82-70181 ea.
- Inside the welder — Gas HosePart no. 82-70371 ea.
- Inside the welder — Contact Tip 0.6mm / 0.023"Part no. 50-70061 ea.
- Inside the welder — Contact Tip 0.8mm / 0.030"Part no. 50-70081 ea.
- Inside the welder — Contact Tip 0.9mm / 0.035"Part no. 50-70091 ea.
- Inside the welder — Contact Tip 1.0mm / 0.040"Part no. 50-70101 ea.
- Inside the welder — Wire Roller 0.6mm/0.9mm (0.023"/0.035")Part no. 50-70201 ea.
- Inside the welder — Wire Roller 1.0mm/1.2mm (0.040"/0.045")Part no. 50-70211 ea.
- Inside the welder — Wire Roller 0.8mm/1.0mm (0.030"/0.040"), installed on welderPart no. 50-72091 ea.
- Inside the welder — Accessory ContainerPart no. 83-20601 ea.
- Inside the welder — Welder Handle Hardware
- Inside the welder — Gas Hose Clamps
- Inside the welder — Gas Regulator FittingPart no. F-95 and F-96
Shipping data
- Shipping dimensions
- 28" x 11.5" x 18"
- Shipping weight
- 45 lbs (20.4 kg)
Configure this PR-191 Multiprocess Welder
Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.