Pro Spot
MWS-GTK-AL Aluminum and Glue Dent Repair Station
Aluminum Dent Repair
The MWS-GTK-AL is a mobile dent repair station combining the DA-3 Drawn Arc Welder, the PRO-GTK Glue Tab Kit and a variety of pulling tools on one station, with lockable drawers, tool hooks and separate storage for tooling.
Key specifications
- Weight
- 275 lb (124.7 kg)
- Dimensions
- 32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
- Dimensions
- 32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
- Weight
- 275 lb (124.7 kg)
What TAG confirms with you
- Tools and machines that will run on the system, and how many at once
- Electrical service available at the compressor location
- Air quality needed downstream — drying, filtration or paint-grade air
- Existing piping, tank and drain arrangements you want to keep
- Where the equipment can sit for noise, heat and service access
System Specifications
- 32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm)
- 275 lb (124.7 kg)
What ships with it
110V configuration only. Mounting quantities are specific to this sheet.
- Supplied components
- 37
- Listed as optional
- 1
Included components (37 items)
- Basic Cart, Short 3.5" Casters, MWS-G2Part no. SA-0904
- Tool Board ExpansionPart no. SA-0695
- Folding TablePart no. SA-0678
- Modular Drawer Kit with DividersPart no. SA-0911
- Handle BarPart no. 90-0769
- 110V Power Strip, 6-Outlet, 2-USBPart no. 63-00331 ea.
- Rubber Mat 18 X 26Part no. 90-22001 ea.
- Drawn Arc Dent PullerPart no. DA-3 220V1 ea.
- Glue Tab Kit (110V)Part no. PRO-GTK1 ea.
- Pull Bar 4-footedPart no. PB-101 ea.
- Pivot PullerPart no. PB-201 ea.
- Pull Gun AssemblyPart no. PRO-651 ea.
- Cool Gel Heat Barrier SprayPart no. 89-15091 ea.
- Heat Gun (110V)Part no. 85-02001 ea.
- Infrared Laser ThermometerPart no. 85-04211 ea.
- Air GrinderPart no. 85-30881 ea.
- AL Hammers, 3 Piece SetPart no. SA-00321 ea.
- Abrasive Disk Holder, 2" DiameterPart no. 85-95591 ea.
- Abrasive Disk, 2" DiameterPart no. 85-95785 ea.
- Slide Hammer with HookPart no. CLP-711 ea.
- 7pc Steel Hammer & Dollie SetPart no. 85-12771 ea.
- Pull Rod Kit, 5/16 Diameter - 4pkPart no. PRO-PRX41 ea.
- Lever Bar w/ 4-Hook and Single HookPart no. CLP-801 ea.
- High Strength Formula GluePart no. 84-8002-20PK1 ea.
- 3D Glue TabsPart no. PRO-GT3D1 ea.
- Universal Flat Glue Tabs (18PC kit)Part no. PRO-GTFT1 ea.
- Nut Screw #12 X 1/2", ZINCPart no. S-121236 ea.
- Tool board NutPart no. 52-321136 ea.
- Single HookPart no. 90-01977 ea.
- Double HookPart no. 90-01981 ea.
- Gun Hook (2)Part no. 90-01992 ea.
- Snap HookPart no. 90-02116 ea.
- Cable HookPart no. 90-02432 ea.
- Glue Gun HolsterPart no. 90-26291 ea.
- Glue Stick HolsterPart no. 90-26671 ea.
- Spray Bottle HolsterPart no. 90-27021 ea.
- Heat Gun HolsterPart no. 90-26681 ea.
Listed as optional
- Dust CoverPart no. 80-0005
Compare models
Compare equipment options with TAG based on the work you do and the space available.
| Model | Pro Spot | Pro Spot |
|---|---|---|
| Why TAG lists it | This model | Pro Spot publishes the MWS-AL-COMPLETE as a full aluminum station. Compare before choosing. |
| Dimensions | 32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm) | 32.8 x 18.2 x 39.8 in (834 x 463 x 1011 mm) |
| Weight | 275 lb (124.7 kg) | 275 lb (124.7 kg) |
Configure this MWS-GTK-AL Aluminum and Glue Dent Repair Station
Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
Accessories for MWS-GTK-AL Aluminum and Glue Dent Repair Station
12 of 12 shown
Optional accessory · 12
Optional accessory
Pro Spot AlMgSi Pull Keys, 1.5 mm
Part no. 84-1015
Optional accessory
Pro Spot Twisted AlMgSi Pull Keys, 1.5 mm
Part no. 84-1019
Optional accessory
Pro Spot Twisted AlMg3 Pull Keys, 1.5 mm
Part no. 84-1017
Optional accessory
Pro Spot Glue Sticks, High Strength (20pk)
Part no. 84-8002-20PK
Optional accessory
Pro Spot Weld Stud, M4 x 16, AlMg3
Part no. 84-1020
Optional accessory
Pro Spot Weld Stud, M5 x 20, AlSi
Part no. 84-1007
Compatible consumables
AlMgSi Pull Keys, 1.5 mm
Aluminum Dent Repair · Pull Keys and Studs · 50 pack
Twisted AlMgSi Pull Keys, 1.5 mm
Aluminum Dent Repair · Pull Keys and Studs · 15 pack
Twisted AlMg3 Pull Keys, 1.5 mm
Aluminum Dent Repair · Pull Keys and Studs · 15 pack
Glue Sticks, High Strength (20pk)
Glue Dent Pulling · Glue · 20 pack
Weld Stud, M4 x 16, AlMg3
Aluminum Dent Repair · Pull Keys and Studs · 25 pack
Weld Stud, M5 x 20, AlSi
Aluminum Dent Repair · Pull Keys and Studs · 100 pack
Build out this work area
Related Equipment to Review
Related equipment to review for this work area.
- View details for Pro Spot IH-500 Induction Heater
Pro Spot
Dent Repair
IH-500 Induction Heater
Pro Spot publishes the IH-500 induction heater for heat work in the same repair area.
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.