Skip to content

Se habla español

TAG Auto Equipment
Back to Glue Dent Pulling
Pro Spot LTS Lateral Tension System

Pro Spot

LTS Lateral Tension System

Glue Dent Pulling

Pro Spot's Lateral Tension System applies controlled, opposing mechanical tension for glue pull repair and paintless dent repair, without welding or sparks. Single push/pull models come in 24 in and 36 in lengths, and the 36 in dual push/pull model applies balanced opposing force on larger panels. Deluxe (DX) versions add glue mount feet and crease tab holders. We will confirm the model and attachments with you.

Select model

Choose a model to add this product to your project.

Length
24 in
Action
Single push/pull
Attachments
Standard

Key specifications

Models
LTS-24-SP, LTS-24-SP-DX, LTS-36-SP, LTS-36-SP-DX, LTS-36-DP, LTS-36-DP-DX
LTS-24-SP
24 in single push/pull; rail assembly SA-0916; shipping 36 x 8 x 8 in, 12 lbs
LTS-36-SP
36 in single push/pull; rail assembly SA-0917; shipping 48 x 8 x 8 in, 13 lbs
LTS-36-DP
36 in dual push/pull; rail assembly SA-0918; shipping 48 x 8 x 8 in, 13 lbs
Suction cups
The 100 lb rating is the strength of each suction cup, not a pulling capacity
Specifications
Quantity
1
Request a Quote

Nothing is purchased online. TAG confirms configuration with you.

Choose a model above before adding this product to your project.

Not in your project yet

Configure This ModelRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

What TAG confirms with you

  • Panels you repair most often, such as doors, fenders, roof skins and quarter panels
  • Clear access to the panel surface for suction cups and glue tabs
  • Anchor and mounting points available on the panel for the rail feet
  • Working clearance for the rail length around the repair area
  • Glue pull tabs and tools your technicians already use

Mechanical tension

Fine-thread adjustment applies controlled push or pull force for glue pull and paintless dent repair.

Single or dual action

Single push/pull in 24 in or 36 in, or the 36 in dual push/pull for balanced opposing force.

Standard or deluxe

Deluxe (DX) versions add glue mount feet and crease tab holders.

System Specifications

LTS-24-SP: 24 in single push/pull; rail assembly SA-0916; two 4.5 in suction cups standard.

ConfigurationLengthActionAttachments
LTS-24-SP24 inSingle push/pullStandard
LTS-24-SP-DX24 inSingle push/pullDeluxe
LTS-36-SP36 inSingle push/pullStandard
LTS-36-SP-DX36 inSingle push/pullDeluxe
LTS-36-DP36 inDual push/pullStandard
LTS-36-DP-DX36 inDual push/pullDeluxe
Models
LTS-24-SP, LTS-24-SP-DX, LTS-36-SP, LTS-36-SP-DX, LTS-36-DP, LTS-36-DP-DX
LTS-24-SP
24 in single push/pull; rail assembly SA-0916; shipping 36 x 8 x 8 in, 12 lbs
LTS-36-SP
36 in single push/pull; rail assembly SA-0917; shipping 48 x 8 x 8 in, 13 lbs
LTS-36-DP
36 in dual push/pull; rail assembly SA-0918; shipping 48 x 8 x 8 in, 13 lbs
Included with every LTS
90-1453 nylon strap lanyard with split ring (2), 90-3070 LTS foot mounting block (2), MNL-LTS manual (1), 51-0247 quick-release flat-head pin 1/4 x 1-3/8 (2), C-09 latching snap hook (2), 52-0165 heavy-duty 4.5 in suction cup, 100 lb strength (2), 51-0246 thumb screw 5/16 x 1-3/4 in (2), 90-3071 glue paddle mount foot (2)
Deluxe (DX) attachments
90-3068 perpendicular glue mount foot (2), 90-3069 parallel glue mount foot (2), 90-2798 parallel closed crease tab holder (2), 90-2793 perpendicular crease tab holder (2), 90-2794 parallel crease tab holder (2)
Suction cups
The 100 lb rating is the strength of each suction cup, not a pulling capacity
Applications
Small to medium panel repair, glue pull repair (GPR), paintless dent repair (PDR), tension relief on door, fender, roof skin and quarter panels

Configure this LTS Lateral Tension System

Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Build out this work area

Upgrade Options to Review

Another option to compare in the same line.

Final configuration is confirmed before purchase.

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop