Hunter Engineering
AutoComp Elite® On-Car Brake Lathe
Vehicle Inspection / Brake Service
AutoComp Elite® is Hunter's premium on-car brake lathe. A patented variable-speed drive and Anti-Chatter Technology machine rotors on the vehicle without the vibration buildup of fixed-speed cutting. It comes in Digi-Cal, Standard and Base configurations, and adaptors are selected per vehicle.
Finish
Choose a factory finish to add this product to your project.
Model
Choose a model to add this product to your project.
- Tier
- Digi-Cal
- Maximum speed
- Up to 150 rpm
- Motor
- 1.5 hp
Key specifications
- Anti-Chatter Technology (ACT)
- Oscillates machining speed to prevent vibration buildup
- Adaptors
- Selected per vehicle; Hunter offers an on-car brake lathe adaptor guide
Choose a factory finish above before adding this product to your project.
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
What TAG confirms with you
- Brake and inspection work you handle most often, including light truck or fleet
- Bay or lane space and working clearance around the equipment
- Electrical service, and any air supply or dust extraction at that position
- Daily volume and how many technicians share the equipment
- Delivery access, installation scope and technician training
Three configurations
Choose AutoComp Elite® Base, Standard (Base features plus tablet interface) or Digi-Cal (Digi-Cal rotor measurement plus Standard features).
performance
Up to 150 rpm with a 1.5 hp motor; Hunter reports 50% more power, cutting rotors approximately twice as fast as other lathes.
Anti-Chatter Technology
ACT oscillates machining speed to prevent vibration buildup; automatic direct compensation averages 12 seconds or less.
Measurement & Coverage
AutoComp Elite® Digi-Cal: Digi-Cal rotor measurement plus Standard features. Digi-Cal measures rotor dimensions and depth of cut from the end of the cutter shaft, with LED illumination and a warning when cutting below manufacturer spec. TAG confirms the exact configuration, adaptors and options before purchase.
| Configuration | Tier | Maximum speed | Motor |
|---|---|---|---|
| AutoComp Elite Digi-Cal | Digi-Cal | Up to 150 rpm | 1.5 hp |
| AutoComp Elite Standard | Standard | Up to 150 rpm | 1.5 hp |
| AutoComp Elite Base | Base | Up to 150 rpm | 1.5 hp |
- AutoComp Elite® Digi-Cal (Digi-Cal rotor measurement plus Standard features); AutoComp Elite® Standard (Base features plus tablet interface); AutoComp Elite® Base
- 50% more power, cutting rotors approximately twice as fast as other lathes; up to 150 rpm; 1.5 hp motor
- Automatic direct compensation, 12 seconds or less average compensation time, five adjustments in a single revolution
- Oscillates machining speed to prevent vibration buildup
- Measures rotor dimensions and depth of cut from the end of the cutter shaft; LED illumination; warning when cutting below manufacturer spec
- Touchscreen with rotor specs, on-board training videos, vehicle database and BitMinder cutting bit tracking
- Selected per vehicle; Hunter offers an on-car brake lathe adaptor guide
Configure this AutoComp Elite® On-Car Brake Lathe
Add the equipment to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
Accessories for AutoComp Elite® On-Car Brake Lathe
48 of 48 shown
Optional accessory · 48
Optional accessory
Hunter Engineering Flange Adaptor — BMW 4-Lug 4x100 mm
Part no. 175-517-2
Optional accessory
Hunter Engineering Flange Adaptor — 8x225 mm / 10x225 mm
Part no. 175-510-1
Optional accessory
Hunter Engineering Lug Nut 12mm x 1.75mm
Part no. 76-409-2
Optional accessory
Hunter Engineering Flange Adaptor — 8x225 mm / 10x7.25 in. / 10x225 mm
Part no. 175-496-1
Optional accessory
Hunter Engineering Flange Adaptor — 5x8.00 in. / 6x8.75 in.
Part no. 175-505-1
Optional accessory
Hunter Engineering Flange Adaptor — 5x130/135/150/160 mm
Part no. 175-498-1
Configuration-specific items
Required accessory
Hunter Engineering Lug nut kit
Part no. 20-3714-1
Full DetailsTAG confirms for your configurationRequired accessory
Hunter Engineering Trolley stand & support structure
Part no. 20-3642-1
Full DetailsTAG confirms for your configuration
Build out this work area
Related Equipment to Review
Related equipment to review for this work area.
- View details for Hunter Engineering Quick Check Drive® Inspection System
Hunter Engineering
Vehicle Inspection / Brake Service
Quick Check Drive® Inspection System
Hunter publishes Quick Check Drive as the inspection system that identifies brake work.
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.