Skip to content

Se habla español

281-817-1078
TAG Auto Equipment
Back to In-Ground Lifts
Challenger Lifts EW12 Series 12K Wide Inground Lift

Challenger Lifts

EW12 Series 12K Wide Inground Lift

In-Ground Lifts

Challenger's 12,000 lb. hydraulic wide inground lift provides extra-wide drive-through clearance for wide-bodied and electric vehicles, with true 3-stage arms and double-telescoping screw pads standard.

Finish

Choose a factory finish to add this product to your project.

Finish availability can change by model, series and production run. TAG confirms current factory finish availability with the manufacturer before ordering.

Key specifications

Lifting capacity
12,000 lbs.
Capacity per arm
3,000 lbs.
Rise height
78"
Speed of rise
63 s
Screw pad height
4" - 6.125"
Width overall
121.5"
Specifications

Nothing is purchased online. TAG confirms configuration with you.

Choose a factory finish above before adding this product to your project.

Not in your project yet

Configure This ModelChoose AccessoriesRequest Consultation

Fit & requirements

Review the space and utility needs for this model with TAG before ordering.

Lifting capacity
12,000 lbs.
Capacity per arm
3,000 lbs.
Drive-thru clearance
88"
Width overall
121.5"
Air required
90 - 120 psi
Motor / voltage
2HP, 208v-230v, 60Hz, 1Ph

What TAG confirms with you

  • Slab thickness, age and condition where the lift will be anchored
  • Bay width, drive-through length and ceiling height at the highest point
  • Overhead obstructions: doors, lighting, ductwork and sprinkler heads
  • Vehicles you lift most often, including the heaviest and longest
  • Electrical service available at the bay and who runs the final connection
Ask TAG about this model

Capacity & Dimensions

Model
EW1220
Lifting capacity
12,000 lbs.
Capacity per arm
3,000 lbs.
Arms
3-stage front / 3-stage rear
Screw pad height
4" - 6.125"
Arm reach
20" - 48.5"
Stroke
72"
Rise height
78"
Drive-thru clearance
88"
Width overall
121.5"
Speed of rise
63 s
Air required
90 - 120 psi
Motor / voltage
2HP, 208v-230v, 60Hz, 1Ph
ALI/ETL certified
Yes
Available colors
Black, Red, Blue

Configure this EW12 Series 12K Wide Inground Lift

Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.

Accessories for EW12 Series 12K Wide Inground Lift

TAG confirms final fit and configuration before purchase.

Optional accessory · 7

  • Optional accessory

    Challenger Lifts Cab-Off Footpad Kit (B2290)

    Part no. B2290

    Challenger footpad kit for Challenger two-post lifts, designed to safely lift cabs off truck frames. The pads feature a U-channel that cradles the pinch welds. Sold in sets of four.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Light Bar Kit (EAK0361V64A-US)

    Part no. EAK0361V64A-US

    LED light bars that come in pairs, feature motion detection, are 27" long and include 10400 mAh rechargeable batteries. The strong magnets place light in many different areas of a shop, output is adjustable from 100 to 1000 lumens, and the ends rotate 360 degrees.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Standard Footpad (B2270)

    Part no. B2270

    Premium telescoping polyurethane footpad, the standard pad for most Challenger lifts. The pads screw up and down so technicians can reach a variety of lift points on many different vehicle types. Sold individually.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Round Rubber Footpad (B2260)

    Optional round rubber double telescoping footpad. Fits all 10K, 12K and 16K inground and above ground lifts. Sold individually.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Sprinter Kit (10333)

    Part no. 10333

    Challenger adapter kit for Challenger two-post lifts, including two cradle adapters for frame engagement and two pin adapters that fit tightly into holes on vehicle frames.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts GM Truck Footpad Set (B2280PR)

    Part no. B2280PR

    Drop-in wide-frame footpads that prepare a Challenger lift for 2019 and newer GM half-ton pickup trucks. Challenger notes the front frame rails on these trucks are wider, which required a new footpad, and that using the standard footpads can cause damage to the frame at this lifting point. Only one pair is needed for the front section of the truck when lifting. Fits Cadillac, Chevrolet and GMC trucks.

    Fits this model.

    Full Details

  • Optional accessory

    Challenger Lifts Electric Vehicle Footpad Kit (EVFPK)

    Part no. EVFPK

    Challenger footpad kit designed to support select electric vehicles. Fits most Challenger two-post lifts. Sold in sets of four.

    Fits this model.

    Full Details
My TAG Project (0)

Compare models

Compare equipment options with TAG based on the work you do and the space available.

ModelChallenger Lifts
EW12 Series 12K Wide Inground LiftYou are viewing		Challenger Lifts
EV1220 Series 12K Heavy-Duty Inground Lift
Why TAG lists itThis modelChallenger publishes the EV1220 series as a 12K heavy-duty inground platform. Compare before choosing.
Lifting capacity12,000 lbs.12,000 lbs.
Arms3-stage front / 3-stage rear3-stage front / 3-stage rear
Screw pad height4" - 6.125"5" - 6.75"
Arm reach20" - 48.5"19.625" - 48"
Stroke72"72"
Rise height78"78"

How TAG can help

Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.

  • Site review

    TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.

  • Delivery & installation

    Plan delivery and installation with TAG. Your quote will state what is included.

  • Training

    Ask TAG about training for your team and the equipment you choose.

  • Service & calibration

    Contact TAG to confirm service options for this model in your area.

Next step

Ready to scope this model into your shop?

TAG will confirm configuration, installation requirements, training and service coverage for your facility.

Build My Shop