Challenger Lifts
CLHM-140 / CLHM-190 / CLHM-190W 14K & 19K Heavy-Duty Mobile Column Lifts
mobile-column-lifts
Challenger's heavy-duty CLHM Series mobile lifting system is available in 14,000 lb. and 19,000 lb. capacity columns and can be operated on almost any solid surface, indoors or out. The system lifts rubber-tired vehicles from passenger cars to 2-, 3- or 4-axle vehicles, and it handles vehicles of any axle length or wheelbase. A set of two provides 28,000 or 38,000 lbs. of capacity and a set of eight provides 112,000 or 152,000 lbs. Each column has an integrated touch-screen console so the set can be run from any unit, a built-in 110-volt multi-stage charger, wireless control across 12 radio frequencies, linear position transducers for synchronization, integrated weight gauges, and an adjustable wheel carriage. This page covers three models: CLHM-140, CLHM-190 and the wide-carriage CLHM-190W.
Model
Choose a model to add this product to your project.
- Capacity per column
- 14,000 lbs.
- Unit width
- 44.25"
- Max. pressure
- 2,180 psi
- Lift speed
- 60" per min.
Key specifications
- Lifting capacity per column
- 14,000 lbs. (CLHM-140) / 19,000 lbs. (CLHM-190, CLHM-190W)
- Height of lift unit at full rise
- 157.125" (all models)
- Height of lift unit
- 88.5" (all models)
- Maximum lift height (4 or more units)
- 69"
- Maximum lift height (2 units, normal mode)
- 32"
- Width of lift unit
- 44.25" (140, 190) / 49" (190W)
Choose a model above before adding this product to your project.
Not in your project yet
Fit & requirements
Review the space and utility needs for this model with TAG before ordering.
- Lifting capacity per column
- 14,000 lbs. (CLHM-140) / 19,000 lbs. (CLHM-190, CLHM-190W)
- Height of lift unit
- 88.5" (all models)
- Height of lift unit at full rise
- 157.125" (all models)
- Width of lift unit
- 44.25" (140, 190) / 49" (190W)
- Length of lift unit
- 53.625" (all models)
- Max. hydraulic system operating pressure
- 2,180 psi (140) / 2,600 psi (190, 190W)
- Operating peak power
- 4HP (all models)
- Charger voltage required
- 120 VAC @ 60 Hz; 1.3 Amps (all models)
What TAG confirms with you
- Slab thickness, age and condition where the lift will be anchored
- Bay width, drive-through length and ceiling height at the highest point
- Overhead obstructions: doors, lighting, ductwork and sprinkler heads
- Vehicles you lift most often, including the heaviest and longest
- Electrical service available at the bay and who runs the final connection
14K and 19K per column
CLHM-140 publishes 14,000 lbs. per column; CLHM-190 and CLHM-190W publish 19,000 lbs.
Common lift envelope
All three models publish an 88.5" unit height, 157.125" height at full rise and 60" per min. lift speed.
ALI certified series
Challenger lists all three models as ALI/ETL certified and states the series is ALI certified.
Capacity & Dimensions
CLHM-140: 14,000 lbs. lifting capacity per column; 44.25" width of lift unit; 2,180 psi max. hydraulic system operating pressure; 60" per min. lift speed at max load.
| Configuration | Capacity per column | Unit width | Max. pressure | Lift speed |
|---|---|---|---|---|
| CLHM-140 | 14,000 lbs. | 44.25" | 2,180 psi | 60" per min. |
| CLHM-190 | 19,000 lbs. | 44.25" | 2,600 psi | 60" per min. |
| CLHM-190W | 19,000 lbs. | 49" | 2,600 psi | 60" per min. |
- CLHM-140 / CLHM-190 / CLHM-190W
- 14,000 lbs. (CLHM-140) / 19,000 lbs. (CLHM-190, CLHM-190W)
- 28,000 or 38,000 lbs. (set of 2); 112,000 or 152,000 lbs. (set of 8)
- 88.5" (all models)
- 157.125" (all models)
- 44.25" (140, 190) / 49" (190W)
- 53.625" (all models)
- 69"
- 32"
- 5" - 24.5" (140, 190) / 4" - max determined by tire size (190W)
- 2,180 psi (140) / 2,600 psi (190, 190W)
- 60" per min. (all models)
- 47" (all models)
- 4HP (all models)
- 120 VAC @ 60 Hz; 1.3 Amps (all models)
- Blue
Additional details
- Challenger lists all three models as ALI/ETL certified and states the series is ALI certified.
Configure this CLHM-140 / CLHM-190 / CLHM-190W 14K & 19K Heavy-Duty Mobile Column Lifts
Add the machine to your TAG Project and the configuration steps — quantity, installation, training and site readiness — open right here. Nothing is priced or ordered online.
Compatible accessories
Optional accessory · 1
Optional accessory
Challenger Lifts Light Bar Kit (EAK0361V64A-US)
acc-lift · Efficiency Tools
Build out this work area
Ways to Expand the Workflow
Equipment to review when expanding this workflow.
- View details for Challenger Lifts CLHM-MR20 / CLHM-MR30 / CLHM-MR40 Heavy-Duty Wheel Lift System
Challenger Lifts
mobile-column-lifts
CLHM-MR20 / CLHM-MR30 / CLHM-MR40 Heavy-Duty Wheel Lift System
Challenger publishes the CLHM-MR wheel lift system for heavy wheel-end work in the same shop.
Compare models
Compare equipment options with TAG based on the work you do and the space available.
| Model | Challenger Lifts | Challenger Lifts |
|---|---|---|
| Why TAG lists it | This model | Challenger publishes the CLHM-125-XF as a 12.5K extended-fork mobile column lift. Compare before choosing. |
| Lifting capacity per column | 14,000 lbs. (CLHM-140) / 19,000 lbs. (CLHM-190, CLHM-190W) | 12,500 lbs. (up to 100,000 lbs. with 8 columns) |
| Height of lift unit | 88.5" (all models) | 88.5" |
| Width of lift unit | 44.25" (140, 190) / 49" (190W) | 44.25" |
| Length of lift unit | 53.625" (all models) | 65.3" |
| Maximum lift height (4 or more units) | 69" | 69" |
| Maximum lift height (2 units, normal mode) | 32" | 32" |
How TAG can help
Ask TAG about delivery, installation, training and service for this equipment. Your quote will state what is included.
Site review
TAG reviews equipment dimensions, clearances, slab, utilities and site requirements with you.
Delivery & installation
Plan delivery and installation with TAG. Your quote will state what is included.
Training
Ask TAG about training for your team and the equipment you choose.
Service & calibration
Contact TAG to confirm service options for this model in your area.
Next step
Ready to scope this model into your shop?
TAG will confirm configuration, installation requirements, training and service coverage for your facility.